Randomly displaced phase distribution design for computer-generated binary hologram with narrow recording spots

A random phase mask is often used for Fourier transform holography to improve its recording and reconstruction characteristics. However, a conventional random phase pattern has the disadvantage of expanding the recording spot, which is caused by the high-resolution phase modulation. Previously, we proposed a random phase pattern that makes the recording spot narrower than the conventional one with maintaining a moderate reconstruction quality. In the present study, we apply the proposed random phase pattern to computer-generated binary holograms and evaluate both the hologram distribution and reconstruction quality in terms of practical holographic memory systems. The results confirm the effectiveness of the random phase in the reconstruction for an elementary data pattern.     

Exploiting Transient Radical Cations as Brønsted Acids for Allylic C–H Heteroarylation of Enol Silyl Ethers

Intermediary radical cations, generated through single-electron oxidation of enol silyl ethers by excited Ir-based photocatalysts, can be exploited as Brønsted acids for the activation of heteroarylcyanides. This strategy enables the direct allylic C−H heteroarylation of enol silyl ethers under visible-light irradiation.     

On the six-field model of fluids based on extended thermodynamics

We study the six-field model of fluids (ET6) derived from extended thermodynamics. The six fields are the mass density, the velocity, the temperature, and the dynamic pressure (nonequilibrium pressure). We present the basic system of field equations of ET6. And we elucidate its characteristic features through the studies of the singular limit from polyatomic to monatomic rarefied gases, of hydrodynamic fluctuation, and of a hard-sphere system. Open problems remained in ET6 at present are also pointed out.     

High heat generation ability in AC magnetic field for nano-sized magnetic Y3Fe5O12 powder prepared by bead milling

Nano-sized magnetic Y₃Fe₅O₁₂ ferrite having a high heat generation ability in an AC magnetic field was prepared by bead milling. A commercial powder sample (non-milled sample) of ca. 2.9 μm in particle size did not show any temperature enhancement in the AC magnetic field. The heat generation ability in the AC magnetic field improved with a decrease in the average crystallite size for the bead-milled Y₃Fe₅O₁₂ ferrites. The highest heat ability in the AC magnetic field was for the fine Y₃Fe₅O₁₂ powder with a 15-nm crystallite size (the samples were milled for 4 h using 0.1 mm? beads). The heat generation ability of the excessively milled Y₃Fe₅O₁₂ samples decreased. The main reason for the high heat generation property of the milled samples was ascribed to an increase in the Néel relaxation of the superparamagnetic material. The heat generation ability was not influenced by the concentration of the ferrite powder. For the samples milled for 4 h using 0.1 mm? beads, the heat generation ability (W g⁻¹) was estimated using a 3.58×10⁻⁴ fH² frequency (f/kHz) and the magnetic field (H/kA m⁻¹), which is the highest reported value of superparamagnetic materials.     

Growth of large La2−xSrxCuO4 single crystals using tilting-mirror-type infrared heating image furnace

Large single crystals of La_2−xSr_xCuO₄ (LSCO) high-T_c superconductors were grown by the infrared heating floating zone (IR-FZ) method using a tilting-mirror-type image furnace. The maximum diameter of the LSCO crystals increased to 10 mm in the tilting-mirror-type image furnace from 6 mm in the conventional image furnace. CuO rich feeds were required for the crystal growth using the tilting-mirror-type image furnace to compensate for the lack of CuO caused by the significant evaporation of CuO during the growth. The evaporation of CuO was affected by the tilting angle of the mirrors of the image furnace and by feed diameter. The optimized growth conditions were as follows: mirror tilting angle, 20°; feed diameter, 10 mm∅; and feed composition 50.7 mol% CuO.     

Total synthesis of makaluvamine A/D, damirone B, batzelline C, makaluvone, and isobatzelline C featuring one-pot benzyne-mediated cyclization-functionalization

Total synthesis of pyrroloquinoline alkaloids, such as makaluvamine A/D, damirone B, batzelline C, makaluvone, and isobatzelline C, was achieved featuring a one-pot benzyne-mediated cyclization-functionalization reaction. The synthetic utility was demonstrated by the construction of the common pyrrolo[4,3,2-de]quinoline skeleton.